The interior finishes include a polished and stained concrete floor on the lower level while a combination of Cintiva vinyl and carpet are used for the top floor. The exterior uses an EIFS wall cladding designed to provide a seamless transition from the existing structure to the new addition.
Project Size: 19,270 sq ft
Construction: IBC Type II-b
Contract Type: Stipulated Sum DesignBuild
Facility Use: Vocational Classrooms Administrative Offices Description Two-story permanent modular
Completion: 6 months
]]>The building can accommodate up to 296 clients in four 50-man dorms, three 24-man dorms, and one 24-woman dorm. The steel clear span design allows for a large open seating and activity area, in addition to two large partitionable classrooms, a full commercial kitchen, multiple administrative offices and counselor rooms, a control room, and a nurses area. Ramtech was responsible for the full site development of the four acres that accommodate the building, 40 parking spaces, two basketball courts, and two covered pavilions.
Project Size: 31,752 sq ft
Construction: IBC Type V-b
Contract Type: Design-Build
Facility Use: Residential reintegration facility
Description: Dallas Transitional Center
Completion: 250 days including design
]]>The Type V-B meets all the latest model building codes and the areas structural criteria for Seismic Category A, a 170 mile-per-hour Exposure D wind load, and a .54 psi Blast Overpressure Rating. The building features individual private offices that use a glass interior storefront partition system around the perimeter of the interior and a large L-shaped clear span office area for multiple cubicles. There are also two large training and conference rooms, and a separate crew room and locker storage area. To accommodate the Gulf Coast areas high humidity, Lennox roof-mounted HVAC units were utilized.
Project Size: 16,800 sq ft
Construction: Type V-b
Contract Type: Negotiated
Facility Use: Engineering and office space
Description: Clear span office area for multiple cubicles, crew room, two conference rooms, and locker storage
Completion: 165 days
]]>Project Size: 99,050 sq ft
Construction: Type V
Facility Use: Combat Aviation Brigade Headquarters Facility
Description: Multi-story Designed exteriors to match existing base facilities Brick masonry exterior
Completion: 18 months
]]>
The ground floor incorporates three training classrooms, with the upper floor providing space for 14 private offices and three cubicle office areas. The building also features three conference rooms, two communication rooms, and a SIPRNET room. The building was designed to blend in with the existing architecture of the base by using a brick and EIFS exterior with a standing seam metal roof.
Project Size: 14,500 sq ft
Construction: Type II
Facility Use: Military Police Batallion HQ
Description: Multi-story Designed exteriors to match existing base facilities Brick masonry wainscot with stucco-clad metal panel
]]>Project Size: 26,128 sq ft
Construction: IBC Type II-b
Contract Type: Design-build Stipulated Sum
Facility Use: Full service critical access hospital
Description: Steel and concrete construction Meets FEMA wind and coastal hurricane specification Simulated stucco exterior finish 250-ton chilled water HVAC system Emergency power system with diesel generator
Completion: 270 days
]]>